<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	<channel>
		<title>Posts on joshlebo.com</title>
		<link>https://www.joshlebo.com/posts/</link>
		<description>Recent content in Posts on joshlebo.com</description>
		<generator>Hugo</generator>
		<language>en-us</language>
		
		
		
		
			<lastBuildDate>Fri, 12 Jan 2024 12:00:00 +0000</lastBuildDate>
		
			<atom:link href="https://www.joshlebo.com/posts/index.xml" rel="self" type="application/rss+xml" />
			<item>
				<title>Garage Door Control with an ESP32, Tasmota, and SmartThings</title>
				<link>https://www.joshlebo.com/posts/2024-01-12-esp32garagedoor/</link>
				<pubDate>Fri, 12 Jan 2024 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2024-01-12-esp32garagedoor/</guid>
				<description>&lt;h2 id=&#34;this-is-a-work-in-progress&#34;&gt;This is a work in progress&lt;/h2&gt;&#xA;&lt;p&gt;Proceed with caution.  I am not responsible for the destruction of property or wildlife. Use sound judgement.&lt;/p&gt;&#xA;&lt;p&gt;Newer Liftmaster garage door openers have MyQ cloud support.  It&amp;rsquo;s possible to use a phone app with the legacy Internet gateway (828LM) to operate the door, but tying that cloud to Samsung SmartThings didn&amp;rsquo;t seem straightforward.  Decided to build my own solution and link to a SmartThings gateway with Matter over local wifi.  This howto would probably work with Amazon Alexa or Google Nest with a few modifications.&lt;/p&gt;</description>
			</item>
			<item>
				<title>Radio Controlled Lawn Mower Build (updated after 5 years)</title>
				<link>https://www.joshlebo.com/posts/2022-10-23-rcmower/</link>
				<pubDate>Sun, 23 Oct 2022 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2022-10-23-rcmower/</guid>
				<description>&lt;p&gt;Proceed with caution. I am not responsible for the destruction of property or wildlife. Use sound judgement.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Table of Contents:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#1-parts-list&#34;&gt;1 Parts List&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#2-making-it-go&#34;&gt;2 Making it Go&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#3-safety-concerns&#34;&gt;3 Safety Concerns&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#4-wiring-diagram&#34;&gt;4 Wiring Diagram&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#5-frame&#34;&gt;5 Frame&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#6-mowing&#34;&gt;6 Mowing&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#7-lessons-learned&#34;&gt;7 Lessons Learned&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#8-mk-ii-rebuild&#34;&gt;8 Mk II Rebuild&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#9-mk-iii-rebuild&#34;&gt;9 Mk III Rebuild&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This journey will require problem solving as well as trial and error. The below pictures of various builds during my own journey.&#xA;&lt;img src=&#34;https://www.joshlebo.com/images/mk3.jpg&#34; alt=&#34;mk3&#34;&gt;&#xA;&lt;img src=&#34;https://www.joshlebo.com/images/mk2grass.jpg&#34; alt=&#34;mk2&#34;&gt;&#xA;&lt;img src=&#34;https://www.joshlebo.com/images/withnewtires.jpg&#34; alt=&#34;mk1&#34;&gt;&lt;/p&gt;</description>
			</item>
			<item>
				<title>Live Trap SMS Alerting Design</title>
				<link>https://www.joshlebo.com/posts/2022-10-20-trapalert/</link>
				<pubDate>Thu, 20 Oct 2022 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2022-10-20-trapalert/</guid>
				<description>&lt;p&gt;Proceed with caution.  I am not responsible for the destruction of property or wildlife. Know your local ordinances when it comes to the capture and release of animals. Use sound judgement.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Table of Contents:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#1-parts-list&#34;&gt;1 Parts List&lt;/a&gt;&#xA;&lt;a href=&#34;#2-wiring&#34;&gt;2 Wiring&lt;/a&gt;&#xA;&lt;a href=&#34;#3-programming&#34;&gt;3 Programming&lt;/a&gt;&#xA;&lt;a href=&#34;#4-setup&#34;&gt;4 Setup&lt;/a&gt;&#xA;&lt;a href=&#34;#5-lessons-learned&#34;&gt;5 Lessons Learned&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The goal was to recieve an SMS notification the moment a live trap has success. This allowed immediate relocation of the animal without visually checking the trap at regular intervals. Picture of the final product below:&#xA;&lt;img src=&#34;https://www.joshlebo.com/images/trap.jpg&#34; alt=&#34;trap&#34;&gt;&lt;/p&gt;</description>
			</item>
			<item>
				<title>Recover A Thecus N2100 from OpenBSD</title>
				<link>https://www.joshlebo.com/posts/2019-02-17-thecusn2100debian/</link>
				<pubDate>Sun, 17 Feb 2019 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2019-02-17-thecusn2100debian/</guid>
				<description>&lt;p&gt;Table of Contents:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#0-background&#34;&gt;0 Background&lt;/a&gt;&#xA;&lt;a href=&#34;#1-parts-list&#34;&gt;1 Parts List&lt;/a&gt;&#xA;&lt;a href=&#34;#2-verification&#34;&gt;2 Verification&lt;/a&gt;&#xA;&lt;a href=&#34;#3-exporting-userland&#34;&gt;3 Exporting Userland&lt;/a&gt;&#xA;&lt;a href=&#34;#4-importing-userland-to-flash&#34;&gt;4 Importing Userland to Flash&lt;/a&gt;&#xA;&lt;a href=&#34;#5-booting&#34;&gt;5 Booting&lt;/a&gt;&#xA;&lt;a href=&#34;#6-further-info&#34;&gt;6 Further Info&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;WARNING!!!Do not try this unless you know what you are doing.  Clearly this could damage your equipment beyond repair.  Proceed at your own risk!&lt;/p&gt;&#xA;&lt;h2 id=&#34;0-background&#34;&gt;0 Background&lt;/h2&gt;&#xA;&lt;p&gt;I purchased a used Thecus N2100 on ebay, that had been altered to run OpenBSD. I BELIEVE the previous owner used [this guide)(ftp://ftp.openbsd.org/pub/OpenBSD/5.1/armish/INSTALL.armish) to perform the installation. My intent was to install Debian linux to replace OpenBSD. Unfortunately, installing the OpenBSD bootloader required the deletion of userland tools from flash due to space constraints. This removes the ability to re-install the original factory firmware, and in turn, prevents the installation of Debian. Using these steps, I was able to restore the unit to original factory condition.  After this, installing Debian worked as expected.&lt;/p&gt;</description>
			</item>
			<item>
				<title>Washing Machine Text Alerting</title>
				<link>https://www.joshlebo.com/posts/2018-04-17-washeralerting/</link>
				<pubDate>Tue, 17 Apr 2018 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2018-04-17-washeralerting/</guid>
				<description>&lt;h4 id=&#34;article-originally-created-4172018&#34;&gt;Article originally created 4/17/2018&lt;/h4&gt;&#xA;&lt;p&gt;From time to time, when I&amp;rsquo;m out in the garage or off somewhere in the house, I forget about my laundry. Or worse, I check on my laundry and find that it&amp;rsquo;s not done.  While not the end of the world, it is inconvenient.  I saw that some modern washers have notification apps to solve this problem. Since the washing machine that came with our house still functions, I decided to retrofit a notification system to it.&lt;/p&gt;</description>
			</item>
			<item>
				<title>Installing Debian on a Thecus N5200</title>
				<link>https://www.joshlebo.com/posts/2017-05-05-thecusdebian/</link>
				<pubDate>Fri, 05 May 2017 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2017-05-05-thecusdebian/</guid>
				<description>&lt;h1 id=&#34;how-to-install-debian-lenny-on-a-thecus-n5200-using-an-external-usb-cdrom&#34;&gt;How to install Debian Lenny on a Thecus N5200, using an external USB CDROM&lt;/h1&gt;&#xA;&lt;p&gt;Table of Contents:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&#34;#0-parts-list&#34;&gt;0 Parts List&lt;/a&gt;&#xA;&lt;a href=&#34;#1-dissassembly&#34;&gt;1 Dissassembly&lt;/a&gt;&#xA;&lt;a href=&#34;#2-vga-hack&#34;&gt;2 VGA Hack&lt;/a&gt;&#xA;&lt;a href=&#34;#3-bios-tweaks&#34;&gt;3 BIOS Tweaks&lt;/a&gt;&#xA;&lt;a href=&#34;#4-flash-drive&#34;&gt;4 Flash Drive&lt;/a&gt;&#xA;&lt;a href=&#34;#5-debian-install&#34;&gt;5 Debian Install&lt;/a&gt;&#xA;&lt;a href=&#34;#6-tweaks&#34;&gt;6 Tweaks&lt;/a&gt;&#xA;&lt;a href=&#34;#7-further-info&#34;&gt;7 Further Info&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;WARNING!!! Do not try this unless you know what you are doing.  Clearly this could damage your equipment beyond repair.  Proceed at your own risk!&lt;/p&gt;&#xA;&lt;h2 id=&#34;0-parts-list&#34;&gt;0 Parts List&lt;/h2&gt;&#xA;&lt;p&gt;Still reading?  Anyway, not many tools are needed for this project.  We use a Thecus N5200 (obviously),&#xA;screwdrivers, pliers, Debian Lenny install disc, systemrescuecd.org disc,&#xA;External USB CDrom drive, an old VGA cable, and a USB keyboard.&lt;/p&gt;</description>
			</item>
			<item>
				<title>Graphing Avaya IP500 PRI Usage</title>
				<link>https://www.joshlebo.com/posts/2016-01-20-avayasnmp/</link>
				<pubDate>Wed, 20 Jan 2016 12:00:00 +0000</pubDate>
				<guid>https://www.joshlebo.com/posts/2016-01-20-avayasnmp/</guid>
				<description>&lt;p&gt;The Avaya IP Office 500 PBX does not appear to have an easy way to graph PRI usage.&lt;/p&gt;&#xA;&lt;p&gt;We discovered a status packet sent by the phone system to Xima that contains the number of current calls on the PRI trunks.   We need to convert a packet on the wire into a WhatsUp Gold Graph.&#xA;I have created a crude proof of concept using a physical server, tcpdump, perl, snmpd extensions, and WhatsUp Actionscript.  Any or all of these pieces could be replaced/refined if need be (for example, we could use a VM or sed instead).&lt;/p&gt;</description>
			</item>
	</channel>
</rss>
