Garage Door Control with an ESP32, Tasmota, and SmartThings
This is a work in progress
Proceed with caution. I am not responsible for the destruction of property or wildlife. Use sound judgement.
Newer Liftmaster garage door openers have MyQ cloud support. It’s possible to use a phone app with the legacy Internet gateway (828LM) to operate the door, but tying that cloud to Samsung SmartThings didn’t seem straightforward. Decided to build my own solution and link to a SmartThings gateway with Matter over local wifi. This howto would probably work with Amazon Alexa or Google Nest with a few modifications.
Radio Controlled Lawn Mower Build (updated after 5 years)
Proceed with caution. I am not responsible for the destruction of property or wildlife. Use sound judgement.
Table of Contents:
1 Parts List 2 Making it Go 3 Safety Concerns 4 Wiring Diagram 5 Frame 6 Mowing 7 Lessons Learned 8 Mk II Rebuild 9 Mk III Rebuild
This journey will require problem solving as well as trial and error. The below pictures of various builds during my own journey.

1 Parts List
- Spektrum AR610 RC receiver - $29
- Spektrum DXe Transmitter - $60 ( I way overbought on this )
- Dimension Engineering 2x60A Motor Controller - $180 (first controller)
- Cytron SmartDriveDuo-60 (MDDS60) - $150 (much better second controller)
- Cheap Used Lawn Mower - $55
- Pride Jet 3 Ultra Wheelchair motors - $100
- Pride Jet 3 Ultra Wheelchair tires - $40 (buy these with the above to save time and headaches) Update - used the rims with better tires
- Large front caster wheels - $20
- Tons of Electronics. 12V to cigarette adapter, switches, wire, etc - $50
- Orange strobe light - $20
- Arduino Nano (actually a clone) - 5 for $20, so I guess $4 (update: not used)
- Sainsmart Dual Relay Board - $7 (update: not used)
- Pololu RC Switch and Relay - $10
- Steel stock for the frame - $100
- Poulan Pro all steel deck lawn mower - $150
Always looking for a project, I decided to build an RC lawn mower. This project seemed to combine mechanical, electrical, and drone experience into one. The idea of mowing the grass from my porch while wearing a beer dispensing helmet always appealed to me.
Live Trap SMS Alerting Design
Proceed with caution. I am not responsible for the destruction of property or wildlife. Know your local ordinances when it comes to the capture and release of animals. Use sound judgement.
Table of Contents:
1 Parts List 2 Wiring 3 Programming 4 Setup 5 Lessons Learned
The goal was to recieve an SMS notification the moment a live trap has success. This allowed immediate relocation of the animal without visually checking the trap at regular intervals. Picture of the final product below:
